Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 123
Default Zone Mode, Switch Zoning Parameters
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Switch Zoning Parameters Default Zone Mode: Allow Active ZoneSet: set Members fibrechannel1/1/1 fibrechannel1/1/2 fibrechannel1/1/3 fibrechannel1/1/4 fibrechannel1/1/5 fibrechannel1/1/6 fibrechannel1/1/7 fibrechannel1/1/8 fibrechannel1/1/9 fibrechannel1/1/10 fibrechannel1/1/11 fibrechannel1/1/12 fibrechannel1/1/15 fibrechannel1/1/17 fibrechannel1/1/18 fibrechannel1/1/19 fibrechannel1/1/20 fibrechannel1/1/21 fibrechannel1/1/22 fibrechannel1/1/23 fibrechannel1/1/24 fibrechannel1/1/25:1 fibrechannel1/1/29:1 fibrechannel1/1/30:1 fibrechannel1/1/30:3 Configure vfabric in NPG mode 1 Configure a vfabric using the vfabric fabric-ID command in CONFIGURATION mode. The switch enters vfabric CONFIGURATION mode. Enter the following commands. 2 Associate a VLAN ID to the vfabric with the vlan vlan-ID command. 3 Add FCoE parameters with the fcoe {fcmap fc-map | fcf-priority fcf-priority-value | fka-adv-period adv-period | vlan-priority vlan-priority-value | keep-alive} command. 4 (Optional) Add a name to the vfabric using the name vfabric-name command. 5 Apply the vfabric to interfaces using the vfabric fabric-ID command in INTERFACE mode. Example configuration of vfabric in NPG mode OS10(config)# vfabric 10 OS10(conf-vfabric-10)# name 10 OS10(conf-vfabric-10)# vlan 100 OS10(conf-vfabric-10)# fcoe fcmap 0x0efc01 OS10(conf-vfabric-10)# fcoe fcf-priority 128 OS10(conf-vfabric-10)# fcoe fka-adv-period 8 OS10(conf-vfabric-10)# fcoe vlan-priority 3 OS10(conf-vfabric-10)# exit OS10(config)# interface ethernet 1/1/31 OS10(conf-if-eth1/1/31)# vfabric 10 View vfabric configuration OS10(conf-vfabric-10)# show configuration ! vfabric 10 name 10 vlan 100 fcoe fcmap 0xEFC01 fcoe fcf-priority 128 Fibre channel 123