Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 88
Forward error correction
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
ip access-group test in lldp med network-policy add 10 ip ospf priority 10 flowcontrol transmit on OS10(conf-if-eth1/1/2)# exit S10(config)# default interface ethernet 1/1/2 Proceed to cleanup the interface config? [confirm yes/no]:y Sep 9 01:06:28 OS10 dn_l3_core_services[968]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %IP_ADDRESS_DEL: IP Address delete is successful. IP 2.2.2.2/24 deleted successfully Sep 9 01:06:28 OS10 dn_l3_core_services[968]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %IP_ADDRESS_DEL: IP Address delete is successful. IP 3.3.3.3/24 deleted successfully Sep 9 01:06:28 OS10 dn_l3_core_services[968]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %IP_ADDRESS_DEL: IP Address delete is successful. IP 1.2.3.4/24 deleted successfully Sep 9 01:06:28 OS10 dn_l3_core_services[968]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %IP_ADDRESS_DEL: IP Address delete is successful. IP 10::1/64 deleted successfully OS10(config)# do show running-configuration interface ethernet 1/1/2 ! interface ethernet1/1/2 no shutdown switchport access vlan 1 Reset default Fibre Channel configuration OS10# show running-configuration interface fibrechannel 1/1/1 ! interface fibrechannel1/1/1 no shutdown description fc-port OS10(conf-if-fc1/1/1)# exit OS10(config)# default interface fc1/1/1 Proceed to cleanup the interface config? [confirm yes/no]:y ! OS10(config)# do show running-configuration interface fibrechannel 1/1/1 interface fibrechannel1/1/1 shutdown Forward error correction Forward error correction (FEC) is used to enhance data reliability. FEC modes supported in OS10: • CL74-FC - Supports 25G and 50G • CL91-RS - Supports 100G • CL108-RS - Supports 25G and 50G • off - Disables FEC NOTE: OS10 does not support FEC on 10G and 40G. Configure FEC OS10(config)# interface ethernet 1/1/41 OS10(conf-if-eth1/1/41)# fec CL91-RS View FEC configuration OS10# show interface ethernet 1/1/41 Ethernet 1/1/41 is up, line protocol is up Hardware is Dell EMC Eth, address is e4:f0:04:3e:1a:06 Current address is e4:f0:04:3e:1a:06 Pluggable media present, QSFP28 type is QSFP28_100GBASE_CR4_2M Wavelength is 64 Receive power reading is 88 Interfaces