Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 470

Example OS10(config)# password-attributes min-length 6 character-restriction upper 2 lower 2 numeric 2 Supported Releases 10.4.0E(R1) or later radius-server host Configures a RADIUS authentication server. Syntax Parameters radius-server host {hostname | ip-address} [auth-port port-number | key authentication-key] • hostname - Enter the host name of the RADIUS server. • ip-address - Enter the IPv4 (A.B.C.D) or IPv6 (x:x:x:x::x) address of the RADIUS server. • auth-port port-number - (Optional) Enter the UDP port number used on the server for authentication (0 to 65535, default 1812) • key authentication-key - (Optional) Enter the authentication key used to authenticate the switch on the server (up to 42 characters; default radius_secure). Default Command Mode Usage Information Example Not configured CONFIGURATION The authentication key must match the key configured on the RADIUS server. Configure global settings for the timeout and retransmit attempts allowed on RADIUS servers by using the radius-server retransmit and radius-server timeout commands. The no version of this command removes a RADIUS server configuration. OS10(config)# radius-server host 1.5.6.4 key secret1 Supported Releases 10.2.0E or later radius-server retransmit Configures the number of authentication attempts allowed on RADIUS servers. Syntax radius-server retransmit retries Parameters retries - Enter the number of retry attempts (0 to 100). Default An OS10 switch retransmits a RADIUS authentication request three times. Command Mode CONFIGURATION Usage Information Use this command to globally configure the number of retransmit attempts allowed for authentication requests on RADIUS servers. The no version of this command resets the value to the default. Example OS10(config)# radius-server retransmit 50 Supported Releases 10.2.0E or later 470 System management