Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 659
Input Conf TLV Pkts, 0 Error Conf TLV Pkts
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 659 highlights
PG-grp Priority# Bandwidth TSA 0 0,1,2,3, 30% ETS 1 4,5,6,7 70% ETS 2 0% ETS 3 0% ETS 4 0% ETS 5 0% ETS 6 0% ETS 7 0% ETS Remote Parameters : Remote is enabled PG-grp Priority# Bandwidth TSA 0 0,1,2,3, 30% ETS 1 4,5,6,7 70% ETS 2 0% SP 3 0% SP 4 0% SP 5 0% SP 6 0% SP 7 0% SP Remote Willing Status is disabled Local Parameters Local is enabled PG-grp Priority# Bandwidth TSA 0 0,1,2,3, 30% ETS 1 4,5,6,7 70% ETS 2 0% ETS 3 0% ETS 4 0% ETS 5 0% ETS 6 0% ETS 7 0% ETS Oper status is init ETS DCBX Oper status is Up State Machine Type is Asymmetric Conf TLV Tx Status is enabled Reco TLV Tx Status is enabled 2 Input Conf TLV Pkts, 27 Output Conf TLV Pkts, 0 Error Conf TLV Pkts 2 Input Reco TLV Pkts, 27 Output Reco TLV Pkts, 0 Error Reco TLV Pkts 10. iSCSI optimization configuration (global) This example accepts the default settings for aging time and TCP ports used in monitored iSCSi sessions. A Compellant storage array is connected to the port. The policy-iscsi policy map sets the CoS dot1p priority used for iSCSI traffic to 6 globally on the switch. By default, iSCSI traffic uses priority 4. The iscsi priority-bits 0x40 command sets the advertised dot1p priority used by iSCSI traffic in application TLVs to 6. Hexadecimal 0x40 is binary 0 1 0 0 0 0 0 0. OS10(conf-if-eth1/1/53)# iscsi profile-storage compellent OS10(conf-if-eth1/1/53)# lldp tlv-select dcbxp-appln iscsi OS10(conf-if-eth1/1/53)# exit OS10(config)# iscsi target port 3261 ip-address 10.1.1.1 OS10(config)# policy-map type application policy-iscsi OS10(config-pmap-application)# class class-iscsi OS10(config-pmap-c-app)# set qos-group 6 OS10(config-pmap-c-app)# set cos 6 OS10(config-pmap-c-app)# exit OS10(config-pmap-application)# exit Converged data center services 659