Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 617
View VLT information, D2config# interface port-channel 20
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 617 highlights
C2(conf-if-eth1/1/6)# channel-group 20 C2(conf-if-eth1/1/6)# exit Sample configuration of D2: • Configure peer routing: D2(config)# vlt-domain 20 D2(conf-vlt-20)# discovery-interface ethernet1/1/1 D2(conf-vlt-20)# discovery-interface ethernet1/1/2 D2(conf-vlt-20)# peer-routing D2(conf-vlt-20)# exit • Configure VRRP on L2 links between core routers: D2(config)# interface vlan 100 D2(conf-if-vl-100)# ip address 10.10.100.4/30 D2(conf-if-vl-100)# vrrp-group 10 • Configure VLT port channel for VLAN 100: D2(config)# interface port-channel 10 D2(conf-if-po-10)# vlt-port-channel 10 D2(conf-if-po-10)# switchport mode trunk D2(conf-if-po-10)# switchport trunk allowed vlan 100 D2(conf-if-po-10)# exit • Add members to port channel 10: D2(config)# interface ethernet 1/1/3 D2(conf-if-eth1/1/3)# channel-group 10 D2(conf-if-eth1/1/3)# exit D2(config)# interface ethernet 1/1/4 D2(conf-if-eth1/1/4)# channel-group 10 D2(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: D2(config)# router ospf 100 D2(conf-router-ospf-100)# exit D2(config)# interface vlan 200 D2(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: D2(config)# interface port-channel 20 D2(conf-if-po-20)# vlt-port-channel 20 D2(conf-if-po-20)# switchport mode trunk D2(conf-if-po-20)# switchport trunk allowed vlan 200 D2(conf-if-po-20)# exit • Add members to port channel 20: D2(config)# interface ethernet 1/1/5 D2(conf-if-eth1/1/5)# channel-group 20 D2(conf-if-eth1/1/5)# exit D2(config)# interface ethernet 1/1/6 D2(conf-if-eth1/1/6)# channel-group 20 D2(conf-if-eth1/1/6)# exit View VLT information To monitor the operation or verify the configuration of a VLT domain, use a VLT show command on primary and secondary peers. • View detailed information about the VLT domain configuration in EXEC mode, including VLTi status, local and peer MAC addresses, peer-routing status, and VLT peer parameters. show vlt domain-id • View the role of the local and remote VLT peer in EXEC mode. show vlt domain-id role • View any mismatches in the VLT configuration in EXEC mode. show vlt domain-id mismatch • View detailed information about VLT ports in EXEC mode. show vlt domain-id vlt-port-detail Virtual link trunking 617