Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 85
Con breakout mode
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 2. S4148U-ON unified port groups To enable Ethernet interfaces in a unified port group: 1 Configure a unified port group in CONFIGURATION mode. Enter 1/1 for node/slot. The port-group range depends on the switch. port-group node/slot/port-group 2 Activate the unified port group for Ethernet operation in PORT-GROUP mode. To activate a unified port group in Fibre Channel mode, see Fibre Channel interfaces. The available options depend on the switch. mode Eth {100g-1x | 50g-2x | 40g-1x | 25g-4x | 10g-4x} • 100g-1x - Reset a port group to 100GE mode. • 50g-2x - Split a port group into two 50GE interfaces. • 40g-1x - Set a port group to 40GE mode for use with a QSFP+ 40GE transceiver. • 25g-4x - Split a port group into four 25GE interfaces. • 10g-4x - Split a port group into four 10GE interfaces. 3 Return to CONFIGURATION mode. exit 4 Enter Ethernet Interface mode to configure other settings. Enter a single interface, a hyphen-separated range, or multiple interfaces separated by commas. interface ethernet node/slot/port[:subport] Configure Ethernet unified port interface OS10(config)# port-group 1/1/13 OS10(conf-pg-1/1/13)# mode Eth 25g-4x OS10(conf-pg-1/1/13)# exit OS10(config)# interface ethernet 1/1/43:1 OS10(conf-if-eth1/1/43:1)# View Ethernet unified port interface OS10(config)# interface ethernet 1/1/43:1 OS10(conf-if-eth1/1/43:1)# show configuration ! interface ethernet1/1/43:1 no shutdown Configure breakout mode Using a supported breakout cable, you can split a 40GE QSFP+ or 100GE QSFP28 Ethernet port into separate breakout interfaces. All breakout interfaces have the same speed. You can set a QSFP28 port to operate in 40GE mode with a QSFP+ transceiver. interface breakout node/slot/port map {10g-4x | 25g-4x | 40g-1x | 50g-2x | 100g-1x} • node/slot/port - Enter the physical port information. • 10g-4x - Split a QSFP28 or QSFP+ port into four 10G interfaces Interfaces 85