Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 163
clear lacp counters, lacp max-bundle, Default, Command Mode, Usage Information, Example
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
• active - Enter to enable the LACP interface. The interface is in the Active Negotiating state when the port starts negotiations with other ports by sending LACP packets. • on - Enter so that the interface is not part of a dynamic LAG but acts as a static LAG member. • passive - Enter to only enable LACP if it detects a device. The interface is in the Passive Negotiation state when the port responds to the LACP packets that it receives but does not initiate negotiation until it detects a device. Default Command Mode Usage Information Example Not configured INTERFACE When you delete the last physical interface from a port-channel, the port-channel remains. Configure these attributes on an individual member port. If you configure a member port with an incompatible attribute, OS10 suspends that port in the port-channel. The member ports in a port-channel must have the same setting for link speed capability and duplex capability. The no version of this command removes the interface from the portchannel. OS10(config)# interface ethernet 1/1/10 OS10(conf-if-eth1/1/10)# channel-group 10 mode active OS10(conf-if-eth1/1/10)# exit OS10(config)# interface ethernet 1/1/11 OS10(conf-if-eth1/1/11)# channel-group 10 mode active Supported Releases 10.2.0E or later clear lacp counters Clears the statistics for all interfaces for LACP groups. Syntax clear lacp counters [interface port-channel channel-number] Parameters • interface port-channel - (Optional) Enter the interface port-channel number. • channel-number - (Optional) Enter the LACP port-channel number (1 to 128). Default Command Mode Usage Information Example Not configured EXEC If you use this command for a static port-channel group without enabling the aggregation protocol, the device ignores the command. If you do not enter a port-channel number, the LACP counters for all LACP port groups clear. OS10# clear lacp counters Example (PortChannel) OS10# clear lacp counters interface port-channel 20 Supported Releases 10.2.0E or later lacp max-bundle Configures the maximum number of active members allowed in a port-channel. Syntax Parameters lacp max-bundle max-bundle-number max-bundle-number - Enter the maximum bundle size (1 to 32). Layer 2 163