Dell PowerSwitch S4112F-ON OS10 Enterprise Edition User Guide Release 10.4.0ER - Page 579
match, match cos
View all Dell PowerSwitch S4112F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 579 highlights
Default Command Mode Usage Information Example Disabled (off) INTERFACE The no version of this command returns the value to the default. OS10(conf-if-eth1/1/2)# flowcontrol transmit on Supported Releases 10.3.0E or later match Configures match criteria for the QoS policy. Syntax match {cos cos-number | ip [access-group name name | dscp dscp-value | precedence value] | ipv6 [access-group name name [set dscp dscp-value]] | mac access-group acl-name | not [ip | cos] vlan vlan-id} [set dscp dscp-value] Parameters • cos cos-number - Enter a queue number for the CoS match criteria (0 to 7). • ip - Enter the IPv4 match criteria. • access-group name name - (Optional) Enter the IPv4 access-group name. • dscp dscp-value - (Optional) Enter a DSCP value for Layer 3 DSCP match criteria (0 to 63). • precedence value - (Optional) Enter a precedence value for Layer 3 precedence match criteria (0 to 7). • ipv6 - Enter the IPv6 match criteria. • access-group name name - (Optional) Enter the IPv6 access-group name. • set dscp dscp-value - (Optional) Configure a DSCP value for Layer 3 DSCP match criteria (0 to 63). • mac access-group name name - Enter an access-group name for the MAC access-list match criteria (up to 140 characters). • set dscp dscp-value - Enter a DSCP value for marking the DSCP packets (0 to 63). • not - Enter the IP or CoS to negate the match criteria. • vlan vlan-id - Enter a VLAN number for VLAN match criteria (1 to 4093). Default Command Mode Usage Information Example Not configured CLASS-MAP In a match-any class, you can enter multiple match criteria. In a match-all class, if the match case is access-group, no other match criteria is allowed. If you attach the access-list to class-map type control-plane, the access-list ignores the permit and deny keywords. OS10(conf-cmap-qos)# match ip access-group name ag1 OS10(config-cmap-qos)# match ipv6 access-group name ACLv6 set dscp 40 Supported Releases 10.2.0E or later match cos Matches a cost of service (CoS) value to L2 dot1p packets. Syntax match [not] cos cos-value Quality of service 579