Dell PowerVault DL4000 Dell PowerVault DL4000 Systems Owner's Manual - Page 51
Removing and Installing the Heat Sink, and release the lever
View all Dell PowerVault DL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Figure 21. Removing and Installing the Heat Sink 1. heat sink 2. retention sockets (2) 3. retention screws (2) 4. processor CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped. 8. Position your thumb firmly over the processor socket-release lever near the unlock icon from the locked position by pushing down and out from under the tab. and release the lever 9. Similarly, position your thumb firmly over the processor socket-release lever near the lock icon and release the lever from the locked position by pushing down and out from under the tab. Rotate the lever 90 degrees upward. 51
Figure 21. Removing and Installing the Heat Sink
1. heat sink
2. retention sockets (2)
3. retention screws (2)
4. processor
CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can
spring up suddenly if not firmly grasped.
8.
Position your thumb firmly over the processor socket-release lever near the unlock icon
and release the lever
from the locked position by pushing down and out from under the tab.
9.
Similarly, position your thumb firmly over the processor socket-release lever near the lock icon
and release the
lever from the locked position by pushing down and out from under the tab. Rotate the lever 90 degrees upward.
51