Dell PowerVault DL4000 Dell PowerVault DL4000 Systems Owner's Manual - Page 89
Message Information, number, location
View all Dell PowerVault DL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Error Code FAN0000 FAN0001 FAN1201 HWC1001 HWC2003 HWC2005 MEM0000 Message Information 2. Turn off the system and remove input power for one minute. 3. Ensure the processor is seated correctly. 4. Reapply input power and turn on the system. 5. If the issue persists, see Getting Help. Message Details Action Message Details Action Message Details Action Message Details Action Message Details Action Message Details Action Message Fan RPM is less than the lower warning threshold. Fan operating speed is out of range. Remove and reinstall the fan. If the issue persists, see Getting Help. Fan RPM is less than the lower critical threshold. Fan operating speed is out of range. Remove and reinstall the fan. If the issue persists, see Getting Help. Fan redundancy is lost. Fan has failed. Remove and reinstall failed fans or install additional fans. The is absent. The absent device may be necessary for proper operation. System functionality may be degraded. Reinstall or reconnect the hardware. The storage cable is not connected, or is improperly connected. The cable may be necessary for proper operation. System functionality may be degraded. Check if the cable is present, then reinstall or reconnect. The system board cable is not connected, or is improperly connected. The cable may be necessary for proper operation. System functionality may be degraded. Check if the cable is present, then reinstall or reconnect. Persistent correctable memory errors detected on a memory device at location(s) . 89