Dell PowerVault NX300 Hardware Owner's Manual - Page 114
Installing the RAID Battery, See
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
3 To disconnect the RAID battery cable from the connector on the system board, press the tab on the RAID battery cable connector, and gently pull the cable connector out of the connector on the system board. See Figure 3-18. 4 Pull back gently on the two tabs holding the RAID battery and lift the RAID battery from the battery carrier. See Figure 3-18. Figure 3-18. Removing and Installing the RAID Battery 1 2 4 3 1 RAID battery 3 battery carrier tabs (2) 2 battery cable connector 4 battery carrier Installing the RAID Battery 1 Insert the RAID battery into the battery carrier until it locks into place. See Figure 3-18. 2 Connect the battery cable to the connector on the system board. See Figure 6-1. 3 Close the system. See "Closing the System" on page 83. 114 Installing System Components