Dell PowerVault NX300 Hardware Owner's Manual - Page 132
Using a knife or a small flat-blade screwdriver, insert the blade beneath, Remove the display module
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
4 Disconnect the control panel cable at back of the control panel board. • For LED control panel see Figure 3-26. • For LCD control panel see Figure 3-27. CAUTION: Do not pull on the cable to unseat the connector. Doing so can damage the cable. a Press the metal tabs on the ends of the cable connector. b Gently work the connector out of the socket. 5 For LCD control panel, disconnect the display module cable from the control panel board. See Figure 3-27. 6 Remove the two screws that secure the control panel board to the system chassis and remove the board. This completes the removal for LED control panel. 7 Remove the display module: a Using a knife or a small flat-blade screwdriver, insert the blade beneath the front panel of the display and slide the blade across the bottom to lift the panel outward. See Figure 3-27. b Bend the panel upward to allow access to the mounting screws. c Remove the two screws that secure the display module to the system chassis. d Remove the display module from the chassis cutout. 132 Installing System Components