Dell PowerVault NX300 Hardware Owner's Manual - Page 52
Warning: A fatal, Memory Mirroring Mode, or
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 1-3. System Messages (continued) Message Causes Corrective Actions Unsupported memory configuration. DIMM mismatch across slots detected: x,x,... Invalid memory configuration. Memory modules are mismatched in the specified slots. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 115. Unused memory detected. DIMM's installed in the following slot are not available when in mirror mode: x,x,x The memory configuration is not optimal for mirroring Mode. Modules in the specified slots are unused. Reconfigure the memory for Memory Mirroring Mode, or change the memory mode to Optimized or Sparing in the BIOS setup screen. See "System Memory" on page 115. Unused memory detected. DIMM's installed in the following slot are not available when in 128-bit advanced ECC mode: x,x,x The memory configuration is Reconfigure the memory for not optimal for Advanced Advanced ECC Memory ECC Memory Mode. Mode, or change the Modules in the specified memory mode to Optimized slots are unused. or Sparing in the BIOS setup screen. See "System Memory" on page 115. Warning: A fatal A fatal system error occurred Check the SEL for error has caused and caused the system to information that was logged system reset! reboot. during the error. See the Please check the applicable troubleshooting system event log! section in "Troubleshooting Your System" on page 147 for any faulty components specified in the SEL. 52 About Your System