Dell PowerVault NX300 Hardware Owner's Manual - Page 96
Removing the Integrated Storage Controller Card, the system from the electrical outlet.
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Removing the Integrated Storage Controller Card CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 82. 3 If installed, remove the expansion card. See "Removing an Expansion Card" on page 95. 4 Remove the card from the storage controller card slot: a Pull the blue release lever to free the card from the connector on the expansion-card riser. b Lift to remove the card. 96 Installing System Components