Dell PowerVault NX300 Hardware Owner's Manual - Page 83
Closing the System, Slide the cover towards the front of the chassis till it snaps in position.
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Figure 3-3. Removing and Replacing the System Cover 1 2 1 latch release lock 2 indent Closing the System 1 Place the cover onto the chassis and offset it slightly towards the back of the system, so that the two hooks on the back edge of the cover fit over the corresponding slots on the back edge of the chassis. See Figure 3-3. 2 Slide the cover towards the front of the chassis till it snaps in position. 3 Rotate the latch release lock in a clockwise direction to secure the cover. Installing System Components 83
Installing System Components
83
Figure 3-3.
Removing and Replacing the System Cover
Closing the System
1
Place the cover onto the chassis and offset it slightly towards the back of
the system, so that the two hooks on the back edge of the cover fit over the
corresponding slots on the back edge of the chassis. See Figure 3-3.
2
Slide the cover towards the front of the chassis till it snaps in position.
3
Rotate the latch release lock in a clockwise direction to secure the cover.
1
latch release lock
2
indent
1
2