Dell PowerVault NX300 Hardware Owner's Manual - Page 60
Using the System Setup Program and UEFI Boot Manager, CAUTION - default password
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Option Description Processor Settings Displays information related to microprocessors (speed, cache size, and so on). See "Processor Settings Screen" on page 61. SATA Settings See "SATA Settings Screen" on page 62. Boot Settings See "Boot Settings Screen" on page 63. Integrated Devices See "Integrated Devices Screen" on page 64. PCI IRQ Assignment Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any installed expansion card that requires an IRQ. Serial Communication (Off default) See "Serial Communication Screen" on page 65. Embedded Server See "Embedded Server Management Screen (Optional)" on Management page 66. Power Management See "Power Management Screen" on page 66. System Security Displays a screen to configure the system password and setup password features. See "System Security Screen" on page 67, "Using the System Password" on page 72, and "Using the Setup Password" on page 74 for more information. Keyboard NumLock (On default) Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards (does not apply to 84-key keyboards). Report Keyboard Errors (Report default) Enables or disables reporting of keyboard errors during the POST. Select Report for host systems that have keyboards attached. Select Do Not Report to suppress all error messages relating to the keyboard or keyboard controller during POST. This setting does not affect the operation of the keyboard itself if a keyboard is attached to the system. F1/F2 Prompt on Error (Enabled default) Enables the system to halt on errors during POST, which allows the user to observe events that may scroll by unnoticed during normal POST. You can select F1 to continue or F2 to enter the System Setup program. CAUTION: When setting this option to Disabled, the system will not halt if an error occurs during POST. Any critical errors will be displayed and logged in the system event log. 60 Using the System Setup Program and UEFI Boot Manager