Dell PowerVault NX300 Hardware Owner's Manual - Page 128
otate the socket-release lever down until it snaps into place. See,
View all Dell PowerVault NX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
8 Verify that the processor is properly aligned and seated. 9 Close the processor shield. See Figure 3-24. 10 Rotate the socket-release lever down until it snaps into place. See Figure 3-24. Figure 3-24. Installing a Processor 2 1 3 1 socket-release lever 3 processor shield 2 processor 11 Install the heat sink. NOTE: Your kit may contain a replacement heat sink if you are installing a processor that consumes additional power. The new heat sink may not appear different than the original one; however, it has improved thermal dissipation specifications and must be used. CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating the processor socket. a Using a clean lint-free cloth, remove the thermal grease from the heat sink. 128 Installing System Components