Dell Precision Tower 7810 Dell Precision Tower 7810 Owners Manual - Page 34
Installing the System-Fan Assembly, Removing the PSU Card
View all Dell Precision Tower 7810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installing the System-Fan Assembly 1. Place the system fans in the system-fan assembly and attach the grommets. 2. Place the system-fan assembly in the chassis and connect the screws to secure the system-fan assembly to the chassis.. 3. Install the system board. 4. Connect the system-fan cables to their connectors on the system board. 5. Route the system-fan cables out of the opening in the system-fan module in the direction of the system board. 6. Connect the screws that secure the drive bay. 7. Route and connect the system-board cable to its connector. 8. Install: a. PCIe-card retention b. memory shroud c. optical drive d. cover 9. Follow the procedures in After Working Inside Your Computer. Removing the PSU Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. computer cover b. PSU 3. Perform the following steps as shown in the illustration: a. Slide the PSU cable shroud from its slot towards the front [1]. b. Remove the PSU cable shroud from the computer [2]. 34