Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 104

PXE Boot Configuration: QLogic QME8242 Mezzanine Card User's Guide Back to Contents Page PXE Boot Configuration: QLogic QME8242 Mezzanine Card User's Guide Configuring PXE Boot This section provides procedures for configuring the QME8242 to perform PXE boot. To configure PXE boot: 1. During POST, press the keys to enter the QLogic QME8242 CNA Function Configuration window. 2. On the Function Configuration main window, ensure that the Protocol is set to PXE, as shown in Figure 1. Figure 1. QLogic QME8242 CNA Function Configuration 3. Press the key to exit. 4. Select Save changes to save your edits, exit, and reboot the system. 5. During POST, press the key to enter the Dell BIOS system. 6. Select Boot Settings, and then press the key, as shown in Figure 2. Figure 2. Dell BIOS: Boot Settings file:///T|/htdocs/NETWORK/QLogic/71922/en/pxe_boot.htm[9/26/2012 4:26:16 PM]