Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 84

User Diagnostics for Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide Back to Contents Page User Diagnostics for Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide This section covers the following information for user diagnostics for Windows NIC driver management applications: Running Windows User Diagnostics Windows Diagnostic Test Descriptions Windows Diagnostic Test Messages NOTE: The current release does not support external and internal loopback tests. Support is expected in a future release. Running Windows User Diagnostics You can run user diagnostics using either the GUI or the CLI. NOTE: Information on installing and starting the GUI version of QLogic's QConvergeConsole utility is provided in the QConvergeConsole User's Guide. All procedural information for that utility is covered in the online help system. To run user diagnostics in the GUI: 1. Access the Windows Control Panel, and then open the Device Manager. 2. In the Device Manager, right-click the QLogic 10 Gb Ethernet adapter, and then on the shortcut menu, click Properties. 3. On the adapter properties page, click the Diagnostics tab. Figure 1 shows the Diagnostics page. Figure 1. Diagnostics Tests on Windows file:///T|/htdocs/NETWORK/QLogic/71922/en/diag_win.htm[9/26/2012 4:26:06 PM]