Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 1306

Example Version 9.2(1.0) 9.1.(0.0) 8.3.19.0 7.8.1.0 7.4.1.0 Description Introduced on the Z9500. Introduced support for OSPFv3 on the S4810 and Z9000. Introduced on the S4820T. Added support for the C-Series. Introduced on the E-Series. DellEMC# show ipv6 ospf 3 neighbor gi 1/2 Neighbor ID Pri State Dead Time Interface 63.114.8.36 1 FULL/DR 00:00:38 4 DellEMC# ID Interface Gi 1/2 snmp context Configure SNMPv3 context name to map multiple OSPFv3 VRF instances. Syntax snmp context {context-name} To clear snmp context, use the no snmp context {context-name} command. Parameters context-name Enter the SNMP context name. The maximum length is 32 alphanumeric characters. Defaults Command Modes Command History None. IPv6 ROUTER OSPF This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.14(1.0) Description Introduced on the S3100 series, S3048-ON, S4048-ON, S4048T-ON, S5048F-ON, S6000, S6010-ON, S6100-ON, Z9100-ON, Z9500, S6000-ON, C9010, MXL, and FN IOM. Usage Information Use SNMPv3 context configuration to distinguish between various OSPFv3 VRF instances. Example DellEMC(conf-ipv6-router_ospf)#snmp context ospf1 DellEMC>show runnig-config ospf ! ipv6 router ospf 10 router-id 10.10.10.1 snmp context ospf1 ! DellEMC> 1306 Open Shortest Path First (OSPFv2 and OSPFv3)