Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 1927

packets state timer Enter the keyword packets to enable debugging of VRRP control packets. Enter the keyword state to enable debugging of VRRP state changes. Enter the keyword timer to enable debugging of the VRRP timer. Command Modes Command History EXEC Privilege This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 8.3.19.0 8.3.10.0 8.4.1.0 8.3.2.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S4820T. Introduced on the S4810. Introduced on E-Series, C-Series, and S-Series. Support was added for IPv6 VRRP groups in nondefault VRF instances. Introduced on the E-Series. Usage Information If you do not specify an option, debugging is active on all interfaces and all VRRP groups. show vrrp ipv6 View the active IPv6 VRRP groups. If no VRRP groups are active, the Dell EMC Networking OS returns No Active VRRP group. Syntax Parameters show vrrp ipv6 [vrid] [interface] [brief] [vrf vrf-name] vrid interface (OPTIONAL) Enter the virtual router identifier for the VRRP group to view only that group. The range is from 1 to 255. Enter the following keywords and the number information: • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a port channel interface, enter the keywords port-channel, and then a number. • For a VLAN interface, enter the keyword vlan, and then a number from 1 to 4094. Virtual Router Redundancy Protocol (VRRP) 1927