Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 1455

port tx and drop 1 UCAST 2 UCAST 0 0 0 0 0 0 0 0 0 0 0 0 rates 3 UCAST 4 UCAST 0 0 0 0 0 0 0 0 0 0 0 0 5 UCAST 0 0 0 0 0 0 6 UCAST 0 0 0 0 0 0 7 UCAST 322323 0 40697472 97 0 0 8 MCAST 0 0 0 0 0 0 9 MCAST 0 0 0 0 0 0 10 MCAST 0 0 0 0 0 0 11 MCAST 0 0 0 0 0 0 12 MCAST 0 0 0 0 0 0 DellEMC# Example of show qos statistics wred-profile DellEMC(conf)#do show qos statistics wred-profile Global Wred State : Enabled Interface Gi 1/11 Drop-statistic Dropped Pkts Green 0 Yellow 6730113 Out of Profile 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Usage Information In a dual homing setup, you can use this command only from the primary VLT peer. The following list describes output of the show qos statistics command in the example: • Queue # - Queue Number. • Queued Bytes - Snapshot of the byte count in that queue. • Queued Pkts - Cumulative packet count in that queue. • Matched Pkts - The number of packets that matched the class-map criteria. NOTE: When you configure trust , matched packet counters are not incremented in this field. • Matched Bytes - The number of bytes that matched the class-map criteria. NOTE: When you configure trust , matched byte counters are not incremented in this field. • Dropped Pkts - The total of the number of packets dropped for green, yellow and out-of-profile. show qos wred-profile View the WRED profile details. Syntax show qos wred-profile wred-profile-name Parameters wred-profile-name Enter the WRED profile name to view the profile details. Defaults Command Modes none • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.12(0.0) 9.10(0.1) Description Modified to display the global WRED state. Introduced on the S6010-ON and S4048T-ON. Quality of Service (QoS) 1455