Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 1796

To disable a particular SupportAssist activity, use the no enable command. Defaults Command Modes Enabled SUPPORTASSIST ACTIVITY FULL-TRANSFER SUPPORTASSIST ACTIVITY CORE-TRANSFER SUPPORTASSIST ACTIVITY EVENT-TRANSFER Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.11(0.0) 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.9(0.0) Description Introduced on the M I/O Aggregator and FN IOM. Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the C9010, Z9100-ON, S6100-ON, and S3100 series. Introduced on the S4810, S4820T, S3048-ON, S4048-ON, S5000, S6000, S6000-ON, Z9500, MXL. Usage Information Enter the specific SupportAssist activity mode and then enable it. NOTE: By default, the full transfer includes the core files. When you disable the core transfer activity, the full transfer excludes the core files. Related Commands • activity - move user to the SupportAssist Activity mode for that activity. SupportAssist Company Commands Dell EMC Networking OS supports the following SupportAssist Company mode commands. address Configure the address information for the company. Syntax address [city company-city] [{province | region | state} name] [country company-country] [{postalcode | zipcode] company-code] To remove a portion of the company address information, use the no address [city | province | region | state | country | postalcode | zipcode] command. For example, to remove the city alone, use the no address city command. To remove the complete company contact information, use the no address command. Parameters city company-city (OPTIONAL) Enter the keyword city then the city or town for the company site. To include a space, enter a space within double quotes. 1796 SupportAssist