Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 438

Version 7.7.1.0 Description Introduced on the C-Series. Usage Information If you configure the set next-hop command in ROUTE-MAP mode, the configuration takes precedence over the neighbor next-hop-self command. If you do not use the all keyword, the next hop of only eBGP-learned routes is updated by the route reflector. If you use the all keyword, the next hop of both eBGP- and iBGP-learned routes are updated by the route reflector. neighbor password Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors. Syntax neighbor {ip-address | peer-group-name} password [encryption-type] password To delete a password, use the no neighbor {ip-address | peer-group-name} password command. Parameters ip-address peer-group-name encryption-type password Enter the IP address of the router to be included in the peer group. Enter the name of a configured peer group. (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means that the password is encrypted and hidden. Enter a text string up to 80 characters long. The first character of the password must be a letter. You cannot use spaces in the password. Defaults Command Modes Command History Not configured. ROUTER BGP This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. 438 Border Gateway Protocol