Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 272

Version 8.3.7.0 8.5.1.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the S4810. Added support for 4-port 40G line cards on the E-Series. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands • match ip address - redistribute routes that match an IP address. • match ip next-hop - redistribute routes that match the next-hop IP address. • match ip route-source - redistribute routes that match routes advertised by other routers. • match metric - redistribute routes that match a specific metric. • match route-type - redistribute routes that match a route type. • match tag - redistribute routes that match a specific tag. match ip address To match routes based on IP addresses specified in an access list, configure a filter. Syntax match ip address prefix-list-name To delete a match, use the no match ip address prefix-list-name command. Parameters prefix-list-name Enter the name of configured prefix list, up to 140 characters. Defaults Command Modes Command History Not configured. ROUTE-MAP This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. 272 Access Control Lists (ACL)