Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.1 - Page 1685

snmp-server community Configure a new community string access for SNMPv1 v2 and v3. Syntax snmp-server community community-name {ro | rw} [ipv6 ipv6-access-list-name [ipv6 ipv6-access-list-name | access-list-name | security-name name] | security-name name [ipv6 ipv6-access-list-name | access-list-name | securityname name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name | security-name name]]] To remove access to a community, use the no snmp-server community community-string {ro | rw} [security-name name [access-list-name | ipv6 access-list-name | accesslist-name ipv6 access-list-name]] command. Parameters community-name ro rw ipv6 access-listname security-name name access-list-name Enter a text string (up to 20 characters long) to act as a password for SNMP. Enter the keyword ro to specify read-only permission. Enter the keyword rw to specify read-write permission. (Optional) Enter the keyword ipv6 then an IPv6 ACL name (a string up to 16 characters long). (Optional) Enter the keywords security-name then the security name as defined by the community MIB. (Optional) Enter a standard IPv4 access list name (a string up to 16 characters long). Defaults Command Modes Command History none CONFIGURATION This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 Description Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Simple Network Management Protocol (SNMP) and Syslog 1685