Dell S500WI User Guide - Page 64
Connected, button to enter IP Address, Subnet Mask, Gateway, or
![]() |
UPC - 884116063018
View all Dell S500WI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. If you select Store without pressing the Enter button, the system will keep the original settings. RESET-Press to reset network configuration. WIRELESS/LAN SETTINGS (IN WIRELESS MODE)-Select and press to activate wireless settings. The wireless settings menu provides the following options: WIRELESS-Default option is Connected. Select Disconnected to disable the wireless connection. NOTE: It is recommended to use the default settings for Wireless Connect. DHCP SERVER-Allows you to enable DHCP server of the wireless. START IP ADDRESS-Automatically or manually assigns the Start IP address of the DHCP server to the projector connected to the wireless. END IP ADDRESS-Automatically or manually assigns the End IP address of the DHCP server to the projector connected to the wireless. SUBNET MASK-Configure the Subnet Mask of the wireless connection. GATEWAY-Check the Gateway address with your network/system administrator if you configure it manually. DNS-Check the DNS Server IP address with your network/system administrator if you configure it manually. STORE-Press to save the changes made in wireless configuration settings. NOTE: 1. Use and button to select IP Address, Subnet Mask, Gateway, DNS, and Store. 2. Press the button to enter IP Address, Subnet Mask, Gateway, or DNS to set the value. (The selected option is highlighted in blue) a Use and buttonto select the option. b Use and button to set the value. 64 Using Your Projector
![](/manual_guide/products/dell-s500wi-user-guide-44a3c3a/64.png)