Dell S5830dn Smart Printer User Guide - Page 109
Disk Wiping menu, Repeat Job Expiration, Wiping Mode, Automatic Method, Notes
View all Dell S5830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Understanding printer menus 109 Use To Repeat Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a time limit on how long the printer stores print jobs. Verify Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a time limit on how long the printer stores print jobs needing verification. Reserve Job Expiration Off 1 hour 4 hours 24 hours 1 week Set a time limit on how long the printer stores print jobs for printing at a later time. Note: Off is the factory default setting. Disk Wiping menu Disk Wiping erases only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs. Note: This menu appears only when a formatted, non-defective printer hard disk is installed. Use To Wiping Mode Auto Specify the mode for disk wiping. Automatic Method Single pass Multiple pass Mark all disk space used by a previous print job. This method does not permit the file system to reuse this space until it has been cleared. Notes: • "Single pass" is the factory default setting. • Only automatic wiping enables users to activate disk wiping without having to turn the printer off for an extended amount of time. • Highly confidential information should be wiped using only the Multiple pass method.