Dell S5830dn Smart Printer User Guide - Page 186
Supply needed to complete job, Too many bins attached [58], Tray [x] paper size unsupported
View all Dell S5830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Troubleshooting 186 Supply needed to complete job A supply needed to complete the job is missing. Cancel the current job. Too many bins attached [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra bins. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Too many disks installed [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra printer hard disks. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Too many flash options installed [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra flash memory. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Too many trays attached [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. Tray [x] paper size unsupported The paper size in the specified tray is unsupported. Replace it with a supported paper size.