Dell S5830dn Smart Printer User Guide - Page 121

Understanding printer menus 121 Use Duplex Binding Long Edge Short Edge Copies 1-999 Blank Pages Do Not Print Print Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3) Separator Sheets Off Between Copies Between Jobs Between Pages Separator Source Tray [x] Multipurpose Feeder Paper Saver Off 2‑Up 3‑Up 4‑Up 6‑Up 9‑Up 12‑Up 16‑Up To Define the way duplexed pages are bound and printed. Notes: • Long Edge is the factory default setting. Long Edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape). • Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape). Specify the default number of copies for each print job. Note: 1 is the factory default setting. Specify whether blank pages are inserted in a print job. Note: Do Not Print is the factory default setting. Stack the pages of a print job in sequence when printing multiple copies. Note: (1,1,1) (2,2,2) is the factory default setting. Specify whether blank separator sheets are inserted. Notes: • Off is the factory default setting. • If Collate is set to (1,2,3) (1,2,3), then Between Copies inserts a blank sheet between each copy job. Otherwise, a blank page is inserted between each set of printed pages. • Between Jobs inserts a blank sheet between print jobs. • Between Pages inserts a blank sheet between each page of a print job. This setting is useful when printing transparencies or when inserting blank pages in a document. Specify the paper source for the separator sheet. Notes: • Tray 1 (standard tray) is the factory default setting. • From the Paper menu, set Configure MP to Cassette for Multipurpose Feeder to appear as a menu setting. Print multiple‑page images on one side of a paper. Notes: • Off is the factory default setting. • The number selected is the number of page images that print per side.