Dell S5830dn Smart Printer User Guide - Page 221
Embedded Web Server does not open
View all Dell S5830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Troubleshooting 221 Action Yes Step 4 a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Reinstall the imaging unit, and then the cartridge. b Resend the print job. Contact technical support. Note: The laser scanning unit may be defective. No The problem is solved. Do vertical voids appear on prints? Embedded Web Server does not open Action Yes Step 1 Make sure the printer IP address is correct. View the printer IP address: • From the printer home screen • From the TCP/IP section in the Network/Ports menu • By printing a network setup page or menu settings page, and then finding the TCP/IP section Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. Go to step 2. Is the printer IP address correct? Step 2 Check if the printer is turned on. Go to step 3. Is the printer turned on? Step 3 Check if the network connection is working. Go to step 4. Is the network connection working? Step 4 Go to step 5. Make sure the cable connections to the printer and print server are secure. For more information, see the setup documentation that came with the printer. Are the cable connections to the printer and print server secure? No Type the correct printer IP address in the address field of your Web browser. Note: Depending on the network settings, you may need to type "https://" instead of "http://" before the printer IP address to access the Embedded Web Server. Turn on the printer. Contact your system support person. Tighten the cable connection.