Dell S5830dn Smart Printer User Guide - Page 71
Supported paper sizes, types, and weights, Paper types and weights supported by the printer
View all Dell S5830dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Paper and specialty media guide 71 Supported paper sizes, types, and weights Paper types and weights supported by the printer The printer engine supports 60-176‑g/m2 (16-47‑lb) paper weights. Paper type 250‑ or 550‑sheet trays 2100‑sheet tray Multipurpose feeder Duplex Paper Card stock X Plain Envelope X X Rough Envelope X X Paper labels X X Pharmacy labels X Transparencies* X X * Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see "Tips on using transparencies" on page 67. Paper sizes supported by the printer Note: When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance. Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet tray Optional Multipurpose 2100‑sheet tray feeder Duplex A4 210 x 297 mm (8.3 x 11.7 in.) A5 148 x 210 mm 2 (5.8 x 8.3 in.) A6 105 x 148 mm X (4.1 x 5.8 in.) JIS B5 182 x 257 mm X (7.2 x 10.1 in.) 1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact technical support. 2 Paper is supported in long‑edge orientation. 3 Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is from 148 mm (5.83 in.) to 356 mm (14 in.).