Dell XPS 13 9315 XPS 13 9315 / XPS 9315 Service Manual - Page 20

Steps, Next steps

Get Dell XPS 13 9315 PDF manuals and user guides View all Dell XPS 13 9315 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Steps 1. Slide the fan cable under the heat sink. 2. Align the screw holes of the fan with the screw hole of the I/O daughter-board and the screw hole of the system board. 3. Slide the fan into its place between the I/O daughter-board and the system board. 4. Replace the two screws (M1.6x2.5) that secure the fan to the I/O daughter-board and the system board. 5. Replace the tape that secures the I/O daughter-board power cable to the fan. 6. Place the I/O daughter-board power cable back to the two routing guides below the fan. 7. Connect the I/O daughter-board power cable to the I/O daughter-board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 20 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Steps
1.
Slide the fan cable under the heat sink.
2.
Align the screw holes of the fan with the screw hole of the I/O daughter-board and the screw hole of the system board.
3.
Slide the fan into its place between the I/O daughter-board and the system board.
4.
Replace the two screws (M1.6x2.5) that secure the fan to the I/O daughter-board and the system board.
5.
Replace the tape that secures the I/O daughter-board power cable to the fan.
6.
Place the I/O daughter-board power cable back to the two routing guides below the fan.
7.
Connect the I/O daughter-board power cable to the I/O daughter-board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
20
Removing and installing components