Dell XPS 13 9315 XPS 13 9315 / XPS 9315 Service Manual - Page 31
System board, Removing the system board
View all Dell XPS 13 9315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. Connect the I/O daughter-board cable to the I/O daughter-board interposer board. 6. Replace the screw (M1.6x2.8) that secures the I/O daughter-board cable to the I/O daughter-board interposer board. 7. Connect the right speaker cable to the I/O daughter-board. 8. Connect the fingerprint-reader cable and close the latch of the fingerprint-reader cable connector on the I/O daughter- board. Next steps 1. Install the fan. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the display assembly. 5. Remove the heat sink. About this task The following image indicates the connectors and component(s) on your system board. Removing and installing components 31