Dell XPS 13 9340 Owners Manual - Page 54
Installing the display assembly
View all Dell XPS 13 9340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Figure 35. Installing the display assembly Steps 1. Open the display assembly to a 90-degree angle and place the computer on the edge of a flat surface. 2. Place the palm-rest and keyboard assembly at the edge of a flat table. 3. Open the hinges of the display assembly to a 90-degree angle. 4. Align the screw holes of the palm-rest and keyboard assembly with the screw holes on the hinges of the display assembly. 5. Replace the three screws (M2.5x5) to secure the left hinge to the palm-rest and keyboard assembly. 6. Replace the three screws (M2.5x5) to secure the right hinge to the palm-rest and keyboard assembly. 7. Close the display assembly, turn the computer over and place it on the flat surface. 8. Slide the camera and display-assembly cable holder back to the system board. 54 Removing and installing Field Replaceable Units (FRUs)