Dell XPS 16 9640 Owners Manual - Page 34
Removing and installing Field Replaceable Units (FRUs), Base cover, Removing the base cover
![]() |
View all Dell XPS 16 9640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5 Removing and installing Field Replaceable Units (FRUs) The replaceable components in this chapter are Field Replaceable Units (FRUs). CAUTION: The information in this section is intended for authorized service technicians only. CAUTION: To avoid any potential damage to the component or loss of data, ensure that an authorized service technician replaces the Field Replaceable Units (FRUs). CAUTION: Dell Technologies recommends that this set of repairs, if needed, to be conducted by trained technical repair specialists. CAUTION: As a reminder, your warranty does not cover damages that may occur during FRU repairs that are not authorized by Dell Technologies. NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Base cover Removing the base cover CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: Ensure that your computer is in Service Mode. For more information, see Before working inside your computer. CAUTION: If you are unable to turn on the computer, if your computer is unable to enter Service Mode, or the computer does not support Service Mode, then disconnect the battery cable. About this task NOTE: Before removing the base cover, ensure that there is no microSD card installed in the microSD card slot on your computer. The following images indicate the location of the base cover and provide a visual representation of the removal procedure. 34 Removing and installing Field Replaceable Units (FRUs)
![](/manual_guide/products/dell-xps-16-9640-owners-manual-b78f207/34.png)