Dell XPS 16 9640 Owners Manual - Page 42

Battery cable, Removing the battery cable

Get Dell XPS 16 9640 PDF manuals and user guides View all Dell XPS 16 9640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Figure 19. Installing the battery Steps 1. Using the alignment posts, place the battery on the palm-rest assembly. 2. Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly. 3. Replace the six screws (M2x4.5) that secure the battery to the system board and palm-rest assembly. 4. Connect the battery cable to the connector (BATT) on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Battery cable Removing the battery cable CAUTION: The information in this removal section is intended for authorized service technicians only. 42 Removing and installing Field Replaceable Units (FRUs)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
Figure 19. Installing the battery
Steps
1.
Using the alignment posts, place the battery on the palm-rest assembly.
2.
Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly.
3.
Replace the six screws (M2x4.5) that secure the battery to the system board and palm-rest assembly.
4.
Connect the battery cable to the connector (BATT) on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Battery cable
Removing the battery cable
CAUTION:
The information in this removal section is intended for authorized service technicians only.
42
Removing and installing Field Replaceable Units (FRUs)