Dell XPS 16 9640 Owners Manual - Page 94
Table 36. BIOS Setup options-Security menu continued, Table 37. BIOS Setup options-Passwords menu
![]() |
View all Dell XPS 16 9640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Table 36. BIOS Setup options-Security menu (continued) Security By default, the Silent option is enabled. Events of tamper detection are logged, post screen warnings are disabled. For additional security, Dell Technologies recommends keeping the Firmware Device Tamper Detection option enabled. Clear Firmware Device Tamper Detection Enables or disables the feature to clear the event and allow booting when a tamper detection event is logged. By default, the Clear Firmware Device Tamper Detection option is disabled. Table 37. BIOS Setup options-Passwords menu Passwords Admin Password The Administrator Password prevents unauthorized access to the BIOS Setup options. Once the administrator password is set, the BIOS setup options can only be modified after providing the correct password. The following rules and dependencies apply to the Administrator Password - ● The administrator password cannot be set if computer and/or internal hard drive passwords are previously set. ● The administrator password can be used in place of the computer and/or internal hard drive passwords. ● When set, the administrator password must be provided during a firmware update. ● Clearing the administrator password also clears the computer password (if set). Dell Technologies recommends using an administrator password to prevent unauthorized changes to BIOS setup options. System Password The System Password prevents the computer from booting to an operating system without entering the correct password. The following rules and dependencies apply when the System Password is used ● The computer shuts down when idle for approximately 10 minutes at the computer password prompt. ● The computer shuts down after three incorrect attempts to enter the computer password. ● The computer shuts down when the Esc key is pressed at the System Password prompt. ● The computer password is not prompted when the computer resumes from standby mode. Dell Technologies recommends using the computer password in situations where it is likely that a computer may be lost or stolen. M.2 PCIe SSD-0 The M.2 PCIe SSD-0 password can be set to prevent unauthorized access of the data stored on the solid-state drive. The computer prompts for the solid-state drive password during boot in order to unlock the drive. A password-secured hard drive stays locked even when removed from the computer or placed into another computer. It prevents an attacker from accessing data on the drive without authorization. The following rules and dependencies apply when the M.2 PCIe SSD-0 password is used - ● The M.2 PCIe SSD-0 password option cannot be accessed when a drive is disabled in the BIOS setup. ● The computer shuts down when idle for approximately 10 minutes at the solid-state drive password prompt. ● The computer shuts down after three incorrect attempts to enter the solidstate drive password and treats the drive as not available. 94 BIOS Setup
![](/manual_guide/products/dell-xps-16-9640-owners-manual-b78f207/94.png)