Denon 2106 Operating Instructions - Page 26
Select, Cursor, Enter, Standard, Surround Parameter
UPC - 081757506571
View all Denon 2106 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ENGLISH Basic Operation FUNCTION INPUT MODE SURROUND MODE STANDARD SELECT SURROUND PARAMETER DTS NEO:6 mode 1 Press the STANDARD button to select the DTS NEO:6 mode. The mode switches as shown below each time the button is pressed. DOLBY PLIIx DTS NEO:6 2 Play a program source. STANDARD FUNCTION ENTER CURSOR INPUT MODE SURROUND PARAMETER SURROUND BACK 6 Turn the SELECT knob, and press the CURSOR F or G button to set the various surround parameters. When the surround parameters are set using the buttons on the main unit, stop operating the buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds. 7 Press the ENTER button to finish the surround parameter mode. 2 Surround parameters w Basic Operation DTS NEO:6 Mode: • Cinema: This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB channels). • Music: This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field. CENTER IMAGE (0.0 to 1.0: default 0.3): The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added. 3 Press the SURROUND PARAMETER button to select the surround parameter mode. 4 Turn the SELECT knob, and press the CURSOR F or G button to select the optimum mode for the source. • When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. 5 Press the SURROUND PARAMETER button, and press the CURSOR D or H button to select the various parameters. 23 ENGLISH