Denon 2106 Operating Instructions - Page 50

ENGLISH Advanced Setup - Part 1 Setting the Power Amp Assign. Make this setting to switch the power amplifier for the surround back channel to ZONE2 or Bi-Amp. Power Amp Assign. Surround back ZONE2 Bi-Amp SPEAKER OUT MAIN ZONE ZONE2 7.1ch system - 5.1ch system 2ch system 5.1ch system - PRE-OUT S.BACK/ZONE Surround back ZONE2 - Setting the Setup Lock The system setup settings can be locked so that they cannot be changed easily. 1 Press the CURSOR D or H button to select "Setup Lock" at the "Option Setup" menu, then press the ENTER button. • The "Setup Lock" screen appears. 1 Press the CURSOR D or H button to select "Power Amp Assign." at the "Option Setup" menu, then press the ENTER button. • The "Power Amp Assign." screen appears. 2 Press the CURSOR F button to select "ON", to lock the system setup settings. 2 Press the CURSOR F or G button to select the Amp Assign mode according to the speaker system you want to set up. 3 Press the ENTER button to enter the setting. • The "Option Setup" menu appears. 3 Press the ENTER button to finalize the setting and exit the system setup mode. • When the setup lock function is activated, the settings listed below cannot be changed, and "SETUP LOCKED" is displayed when related buttons are operated. • System setup settings • Surround parameter settings • Tone control settings • Channel level settings (including test tones) • To unlock, press the SETUP button again and display the "Setup Lock" screen, then select "OFF" and press the ENTER button. • System setup is complete. Once these settings are made, there is no need to change them unless different AV components are connected or the speakers are repositioned. 47 ENGLISH Advanced Setup - Part 1