Denon 2106 Operating Instructions - Page 66
Specifications
UPC - 081757506571
View all Denon 2106 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ENGLISH Specifications 2 Audio section • Power amplifier Rated output: Front: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Center: 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) 135 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Surround: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Surround Back: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.) Dynamic power: 120 W x 2 ch (8 Ω/ohms) 170 W x 2 ch (4 Ω/ohms) 200 W x 2 ch (2 Ω/ohms) Output terminals: Front: A or B 16 ~ 16 Ω/ohms A + B 12 ~ 16 Ω/ohms Center, Surround, Surr.Back: 16 ~ 16 Ω/ohms • Analog Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz: +1, -3 dB (DIRECT mode) S/N: 100 dB (IHF-A weighted) (DIRECT mode) Distortion: 0.008% (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output / Maximum output: 150 mV / 7 V Distortion factor: 0.03 % (1 kHz, 3 V) 2 Video section • Standard video terminals Input / output level and impedance: 1 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +1, -3 dB • S-Video terminals Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 10 MHz - +1, -3 dB • Color component video terminal Input / output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB/CB (blue) signal - 0.7 Vp-p, 75 Ω/ohms PR/CR (red) signal - 0.7 Vp-p, 75 Ω/ohms Frequency response: DC ~ 100 MHz - +0, -3 dB Specifications 2 Tuner section [FM] (note: µV at 75 Ω/ohms, [AM] 0 dBf=1 x 10-15 W) Receiving Range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV 50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) S/N (IHF-A): MONO 77 dB (IHF-A weighted) STEREO 72 dB (IHF-A weighted) Total Harmonic Distortion (at 1 kHz): MONO 0.15 % (1 kHz) STEREO 0.3 % (1 kHz) 2 General Power supply: Power consumption: Maximum external dimensions: Mass: AC 120 V, 60 Hz 5.5 A 1 W max. (Standby) 434 (W) x 171 (H) x 417 (D) mm (17-3/32" x 6-47/64" x 16-27/64") 13.0 kg (28 lbs 11 oz) 2 Remote control unit (RC-1015) Batteries: R6P/AA Type (two batteries) External dimensions: 55 (W) x 225 (H) x 34.5 (D) mm (2-11/64" x 8-55/64" x 1-9/64") Mass: 165 g (Approx. 5.8 oz) (including batteries) * For purposes of improvement, specifications and design are subject to change without notice. 63 ENGLISH