Denon 2106 Operating Instructions - Page 56

ENGLISH Advanced Setup - Part 2 • The Equalizer setting of "Normal", "Flat" and "Front" can be selected after performing the Auto Setup. • When the speaker set as "None" with the Auto Setup is change to on manually, the equalizer of "Normal", "Front" and "Flat" cannot be used. • The Equalizer setting can be selected by SURROUND PARAMETER button. • When headphone is connected, the Room EQ cannot be used. Setting the Direct Mode Setup Perform the ON/OFF setting of Room EQ when the surround mode is "Direct" or "Pure Direct". 1 Press the CURSOR D or H button to select "Direct Mode Setup" at the "Auto Setup/Room EQ" menu, then press the ENTER button. • The "Direct Mode Setup" screen appears. Check the EQ parameter • The frequency characteristic of each speaker is rectified and the tone of the speaker is unified. • The EQ parameters that were set in Auto Setup can be checked. • This item is automatically displayed, after the measurement result of the "Auto Setup/Room EQ" is decided. 1 Press the CURSOR D or H button to select "EQ Parameter Check" at the "Auto Setup/ Room EQ" menu, then press the ENTER button. • The "EQ Parameter Check" screen appears. Advanced Setup - Part 2 5 If the check ends, press the CURSOR D or H button to select "Exit", then press the ENTER button. • The "Auto Setup/Room EQ" menu appears. 6 Press the CURSOR D or H button to select "Exit", then press the ENTER button. • The "System Setup" menu appears. 2 Press the CURSOR D or H button to select the equalizer curve, then press the ENTER button. • The parameter screen appears. 2 Press the CURSOR F or G button to select "ON" or "OFF". 3 Press the ENTER button to enter the setting. • The "Auto Setup/Room EQ" menu appears. 3 Press the CURSOR F or G button to select the speaker channel. 4 Press the ENTER button to enter the setting. 53 ENGLISH