Denon S-302 Owners Manual - English - Page 16

Getting Started Connections Setup Playback Remote Control Information Troubleshooting ENGLISH Connecting Equipment with HDMI Connectors Digital video and digital audio can both be connected using a single HDMI cable. NOTE • When playing multichannel sources, the audio output is downmixed to two channels for output. In addition, the sampling frequency is lowered to 48 kHz. • Video signals are not output properly when using devices that are not HDCP-compatible. •Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product). • The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device. If the connected TV is only compatible with DVI-D terminals, use an HDMI/DVI conversion cable. Copyright protection system In order to play the digital video and audio signals of a DVD Video disc using HDMI connections, both the connected DVD player and TV must be equipped for a copyright protection system called "HDCP" (Highbandwidth Digital Content Protection). HDCP is a copy protection technology consisting of data encoding and mutual identification of the devices. The S-302 is HDCP-compatible. Check the operating instructions of your TV to see if they are compatible. Setting the HDMI output resolution Set the resolution of the video signals output from the HDMI output terminal to a resolution with which the connected devices are compatible. Press HDMI on the remote control unit to select. 480p/576p 720p 1080i 1080p AUTO When connecting with an HDMI/DVI converter cable (adapter) • HDMI video signals are theoretically compatible with the DVI format. When connecting to a TV, etc., equipped with a DVI-D terminal, connection is possible using an HDMI/ DVI converter cable, but depending on the combination of components in some cases the video signals will not be output. • When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly due to poor connections with the connected cable, etc. Condition of signals from the S-302's HDMI output terminal HDMI-compatible monitor Both video and audio output DVI-D-compatible monitor (HDCP compatible) Only video outputz DVI-D-compatible monitor (HDCP non compatible) Neither video nor audio output z: Only output when video signals are of RGB format. Connecting the Playback Components Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Control Dock for iPod Use either a DENON Control Dock for iPod (ASD-1R, sold separately) or an iPod cable (AK-P100, sold separately) to connect the S302 and an iPod. iPod • When using the Control Dock for iPod, certain settings must be made on the Control Dock for iPod. For details, refer to the Control Dock for iPod's operating instructions. • When using an iPod, refer to "iPod® Playback" (vpage 33). 12