Denon S-302 Owners Manual - English - Page 8

Getting Started Connections Setup Playback Remote Control Information Troubleshooting ENGLISH Discs Discs usable on the S-302 Usable discs DVD video Mark (logo) Recorded Signals Disc size DVD-R/DVD+R (z1) (z2) %7% 3 DVD-RW/ DVD+RW (z1) (z3) CD %7% 3F8SJUBCMF r CD-R (z4) CD-RW (z4) Picture CD Fujicolor CD WMA Digital audio + Digital video (MPEG2) 12cm Digital audio MP3 Digital picture (JPEG) 12cm / 8cm Digital picture (JPEG) Digital picture (JPEG) Digital audio 12cm 12cm 12cm b Playing discs with special shapes could damage the set. Do not use such discs. z1 : DVD ± R/DVD ±RW discs recorded on a DVD recorder in the video mode and finalized can be played on the S-302. Note, however, that in some cases the discs may not play properly, depending on their recording conditions. Discs that have not been finalized or DVD ± R/DVD ±RW discs recorded in the VR mode or in CPRM cannot be played. z2 : DVD+R DL.(Dual Layer) cannot be played. z3 : DVD-RW discs recorded in the VR mode and finalized can be played. z4 : According to recording quality, some CD-R/RW cannot be played. CD-R/CD-RW discs recorded and finalized can be played on the S-302. The following types of discs cannot be played on the S-302: • DVD videos with region numbers other than "1" or "ALL" • DVD-ROM/RAM • CD-ROMs (Only JPEG / MP3 / WMA) • VSDs / CVD /SVCD/Video CD • CDV (only the audio portion can be played) • CD-Gs (only the audio portion can be played) • Photo CDs (NEVER play such discs on the S-302) NOTE DVD players and DVD video discs have region numbers (numbers assigned for different regions of the world). The numbers must match or the discs cannot be played.  The Region number for this DVD video player is 1. NOTE • Recordings you have made should only be used for your personal enjoyment, and as per copyright laws may not be used in other ways without permission of the copyright holder. • Do not play CD-R/CD-RW discs containing files in formats other than music CD (CD-DA format), MP3, WMA or JPEG. Depending on the type of file, the set may malfunction or be damaged. Holding Discs Do not touch the signal surface. Loading Discs • Set the disc with the labeled side facing up. • Make sure the disc tray is fully open when inserting the disc. • Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in the inner tray guide (Figure 2). Figure 1 Figure 2 Outer tray guide Inner tray guide 12 cm disc 8 cm disc • Place 8 cm discs in the inner tray guide without using an adapter. • "STOP" is displayed if a disc that cannot be played is loaded. • "0h00m00s" is displayed if the disc is loaded upside-down or if no disc is loaded. NOTE Do not push the disc tray in by hand when the power is turned off. Doing so could damage the set.