Denon S-302 Owners Manual - English - Page 42

Getting Started Connections Setup Playback Remote Control Information Troubleshooting ENGLISH Advanced Operation ON/STANDBY VOLUME ON/STANDBY VOLUME [MUTE] [o p] [STATUS] [TONE] [o p] [SLEEP] Setting the Sleep Timer Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes). 1 Set the current time (vpage 22). : "SETUP" - "TIMER" - "Set Time" (vpage 22) 2 During playback, use [SLEEP] to select the time. The "SLEEP" indicator flashes. 120 90 60 50 40 30 20 10 "SLEEP"indicator off b After about 4 seconds, the "SLEEP" indicator stops flashing, remaining lit, and the settings are automatically entered. 3 The power is set to the standby mode after the set amount of time. Canceling the sleep timer Press [SLEEP] until the "SLEEP" indicator turns off. b The sleep timer can also be canceled by setting the S-302's power to the standby mode using ON/STANDBY. Checking the time remaining until the sleep timer starts In the stop mode, press [STATUS]. The time is displayed. b The time can be displayed by pressing [STATUS] when the power is in the standby mode. (When this is done, the set is no longer in the low power consumption standby mode.) When pressed twice while the time is displayed, the display turns off and the set is put back in the low power consumption standby mode. If the sleep timer and everyday timer settings overlap, the sleep timer has priority. Other Functions Adjusting the Tone 1 Select the adjustment mode using [TONE]. BASS TREBLE DEFEAT 2 With the name of the item to be adjusted selected, press [o p] to adjust the level. [Selectable mode] BASS : Adjusts the bass sound (-10 dB to +10 dB). TREBLE : Adjusts the treble sound (-10 dB to +10 dB). DEFEAT : The tone adjustment circuitry can be bypassed to achieve high sound quality. "0dB" If no operation is performed within 4 seconds, the display switches back to what was previously displayed. Turning the Sound Off Temporarily (Muting) Press [MUTE]. To cancel, either press [MUTE] again or adjust the volume using VOLUME. About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 38