Denon S-302 Owners Manual - English - Page 51

Getting Started Connections Setup Playback Remote Control Information Troubleshooting GDVDH Symptom Countermeasure Playback does not start when 1 button is pressed. Playback stops immediately. • Is there condensation on the disc or player ? (Let stand for 1 or 2 hours.) • Discs other than DVDs and music CDs cannot be played. • Disc is dirty. Wipe off the dirt. Picture is • Some disturbance is normal. disturbed during the search operation. Buttons do not operate. • Some operations are disabled for some discs. No subtitles are • Subtitles are not displayed for DVDs not containing subtitles. displayed. • Subtitles are turned off. Turn the subtitles setting on. Audio (or subtitle) language does not switch. • The audio (or subtitle) language does not switch for discs which do not include multiple audio (or subtitle) languages. • For some discs the audio (or subtitle) language cannot be switched when the operation to switch it is performed, but can be switched on the menu screens. Angle does not switch. • The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. Playback does not • Check the "RATINGS" setting. start when the title is selected. The password for • Initialize using the procedure described at "Resetting the rating level has Microprocessor". been forgotten. Reset all the DVD setting to Factory Preset. The disc is not played with the audio or subtitle language set as the default setting. • The disc does not play with the selected audio or subtitle language if that audio or subtitle language is not included on that DVD. Picture is not • At the GUI menu's "TV Aspect" setting, select "Normal (4:3LB)/ displayed in 4:3 Normal (4:3PS)/Wide (16:9)" and set according to the TV you are (or 16:9). using. Page - 4 5 - - - 18 - 26 - 22 39 18 19 Symptom Menu screen messages for the desired language do not display. Countermeasure • Check the default setting for the disc language's menu language. ENGLISH Page 18 GAudioH Symptom No sound is output from the monitor connected with HDMI connections. Cause Countermeasure • HDMI audio signal output • Set to "Setup" - "Video Setup" destination setting is wrong. - "HDMI Setup" - "HDMI Audio Out"- "On". GTunerH Symptom Continuous noise is heard when receiving FM programs Hissing or continuous noise is heard when receiving AM programs Cause Countermeasure • Antenna cable is not properly • Connect the antenna cable connected. properly. • Connect an outdoor antenna. • This may be noise from a TV or • Turn off the TV. interference from a radio station. • Change the position and direction of the AM loop antenna. Page 19 Page 14 - 47