Denon S-302 Owners Manual - English - Page 53

Getting Started Connections Setup Playback Remote Control Information Troubleshooting Symptom Cause Countermeasure Internet radio • Ethernet cable is not properly • Check the connection status. cannot be played. connected or network is disconnected. • Program is being broadcast in • Only Internet radio programs in non-compatible format. MP3 and WMA can be played on this set. • The computer's or router's • Check the computer's or router's firewall is activated. firewall settings. • Radio station is not currently • Choose a radio station that is broadcasting. currently broadcasting. • IP address is wrong. • Check the set's IP address. Server is not found, or it is not possible to connect to the server. • The computer's or router's • Check the computer's or router's firewall is activated. firewall settings. • Computer's power is not turned • Turn on the power. on. • Server is not running. • Launch the server. • Set's IP address is wrong. • Check the set's IP address. Cannot connect to • Radio station is not currently • Wait a while before trying again. preset or favorite broadcasting. radio stations. • Radio station is not currently in • It is not possible to connect to service. radio stations that are no longer in service. For some radio stations, "Server Full" or "Connection Down" is displayed and station cannot be connected to. • Station is congested or not • Wait a while before trying again. currently broadcasting. Sound is broken during playback. • Network's signal transfer speed • This is not a malfunction. When is slow or communications lines playing broadcast data with a or radio station is congested. high bit rate, the sound may be broken, depending on the communications conditions. Sound quality is • File being played has a low bit • This is not a malfunction. poor or played rate. sound is noisy. Page 15 - - 35 20, 21 - - - 20, 21 - - - - - GWireless LANH Symptom Cannot connect to network. Played sound is interrupted or sound cannot be played. Cause Countermeasure • The settings of the SSID • Match the network settings with and network key (WEP) are the S-302's settings. incorrect. • The reception is poor and the • Shorten the distance from the signals cannot be received. wireless LAN's access point, remove any obstacles and otherwise improve visibility, then try reconnecting. Also install away from microwave ovens and the access points of other networks. • There are multiple networks and • Set the access point's channel the usable channels overlap. settings away from the channels used for other networks. Alternatively, connect using a network cable. • There are multiple networks and • Set the access point's channel the usable channels overlap. settings away from the channels used for other networks. Alternatively, connect using a network cable. ENGLISH Page 21 - - - 49