Epson 695Wi Users Guide - Page 32

Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Removing and Attaching the Cable Cover Projector Connections Installing Batteries in the Remote Control Installing Batteries in the Pens Projector Placement Your ultra-short throw projector is designed to be installed on a wall (with a wall mount) or vertically on a table (with a table mount) to create an interactive tabletop workspace. You can also place the projector on a flat surface such as a desk or table to project in a portable setup. Note: Finger touch (BrightLink 695Wi) is only available if the projector is installed on a wall (with a wall mount) or vertically on a table (with a table mount). Keep these considerations in mind as you select a projector location: • Follow the instructions in the Installation Guide provided with your mounting hardware to install the projector using the included mounting equipment. • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents. • Position the projector within reach of a grounded electrical outlet or extension cord. • If installing vertically on a desk or table, the table projection mount (V12H516020) is required. • If installing on a wall, the wall mount (V12H777020) is required. • If the projector is not mounted, place it on a sturdy, level surface. • For finger touch (BrightLink 695Wi), make sure the projection surface is flat, smooth, and unwarped with no more than 0.2 inch (5 mm) of unevenness in any direction. Projector Setup and Installation Options Projection Distance Parent topic: Setting Up the Projector 32