Epson ActionNote 650 User Manual - Page 102
Card and Socket Services User's Guide, Troubleshooting
View all Epson ActionNote 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
5. If you inserted a RAM or hard disk card, did you format it? Like a diskette, a new RAM or hard disk PC card may need to be formatted (initialized) before you can use it. See the documentation that came with the card for instructions. 6. Are you using a LAN PC card with the power management features enabled or running only on battery power? You should disable the power management features when you are using the computer on a network because these features can interfere with your network software. Also be sure to connect the AC adapter when you use a LAN PC card because these cards consume a lot of power. 7. Is your PC card compatible with the ActionNote? The PC card slots in your computer support PCMCIA version 2.1 or earlier and accept up to two Type I or II cards, or one Type III card. If you aren't sure your card is compatible, call the EPSON Connection to ask about tested cards. 8. Did you run the MS-DOS MEMMAKER utility or load a memory manager (such as MS-DOS EMM386.EXE)? If so, you must ensure that these programs do not interfere with the memory addresses and other settings used by your PCMCIA drivers by editing your CONFIG.SYS file. See the EPSON Card and Socket Services User's Guide for more information. 5-16 Troubleshooting